Description
Used WHE Process Systems Pasteurizer with:
- Capacity: 10,660 pounds per hour
- Skid mounted
- Cherry Burrell Plate Heat Exchanger:
- (98) Heat exchanger plates
- Plate dimensions (inches): 12.5 wide x 36.5 high
- Heat transfer surface area per plate (inches): 8 wide x 33.5 high
- Total heat transfer: 182.38 square feet
- Siemens PLC with keypad
- Epson dot matrix printer
- Balance tank
- Holder tube
- Divert valve
- Centrifugal timing pump with mag meter based timing system
- Deaerator
- Product removal pummp
- Vacuum pump
- Shell and tube hot water make-up set
- Interconnecting piping
- One (1) Travaini pump
- Teco electric motor: 5 horsepower, 1750 rpm, 230/460 volts 13/6.5 amps, 60 Hz, 3 Ph
- One (1) Worthington D1011 centrifugal pump
- Impeller diameter: 6.5
- Motor: 3 horsepower, 3475 rpm, 230/460 volts, 9/4.8 amps, 60 Hz, 3 Ph
- Fristam FPX712130 centrifugal pump
- Motor: Baldor 3 horsepower, 3450 rpm, 208-230/460 volts, 8.2-7.8/3.9 amps, 60 Hz, 3 Ph
- One (1) Cherry-Burrell 4BHK centrifugal pump
- Motor: Leeson 3 horsepower, 1740 rpm, 208-230/460 volts, 8.8/4.4 amps, 60 Hz, 3 Ph
- One (1) Fristam FP741205 centrifugal pump
- Motor: Leeson 2 horsepower, 1740 rpm, 208-230/460 volts, 5.2/3.1 amps, 60 Hz, 3 Ph
- WHE Process Systems stainless steel balance tank:
- Capacity: approximately 60 gallons
- Inside dimensions (inches): 24 diameter x 32 straight side
- One (1) WHE control panel
- Ten (10) Cherry-Burrell stainless steel valves
- One (1) Epson LX-800 printer
- One (1) shell and tube heat exchanger
- One (1) Rosemount transmitter parameter
- Stainless steel construction
- Overall dimensions: 161 long x 96 wide x 120 high
Initial duty was to pasteurize 10,600 pounds per hour of single strngth vegetable juice with a Fahrenheit temperature progression of 40-90-230-260-129-99-70-65 using 22,500 pounds per hour of 260° Fahrenheit hot water, 22,500 pounds per hour of 265° Fahrenheit hot water and 22,500 pounds per hour of 55° Fahrenheit potable water
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
