Used Silverson FLB30 Flashblend High Shear Powder/Liquid Mixing Skid Up To 100 Pounds Per Minute

The Silverson Flashblend FLB30 is a high shear system for rapid incorporation of a wide range of powders, including problematic gums and thickeners. The Flashblend is designed to incorporate powders on a continuous and semi-continuous basis at rates of up to 6000 lbs/hour. The system can handle a wide range of viscosities, from low-viscosity products to highly viscous gels

• How it works: The Silverson Flashblend is designed to rapidly wet out and disperse a wide range of powders into liquids. The system is based on proven technology combined with new techniques which stem from specific research into powders which are difficult to hydrate. The result is a mixer which can produce agglomerate-free homogeneous dispersion
  • Stage 1: The process liquid is pumped at high velocity into the venturi chamber and passes into the In-Line mixer. The combination of the pump, venturi and the pumping action of the In-Line mixer creates a vacuum in the venturi chamber
  • Stage 2: When powder is present in the hopper, the powder feed valve can be opened. The vacuum rapidly draws the powder down into the venturi chamber where it passes with the liquid stream at high velocity into the rotor/stator assembly of the In-Line mixer
  • Stage 3 The liquid/powder mix is then subjected to intense mechanical and hydraulic shear which ensures that it is completely dispersed and agglomerate-free. The resultant product is then passed back to the process vessel by the pumping action of the machine
• Advantages
  • Suitable for large-scale production requirements
  • Consistently delivers agglomerate-free products
  • Ensures high repeatability for consistent results
  • Rapid mixing speed for increased efficiency
  • Minimizes aeration during the mixing process
  • Improve vessel hygiene
  • Viscous liquids can be incorporated into the bulk liquid via the hopper
  • Liquid additives can also be pumped directly into the venturi

Specs

• Typical powder flow rate: up to 100 pounds per minute, depending on application
• A wide range of workheads and screens are available for Silverson high shear mixers (at an additional cost). These interchangeable workheads offer great versatility by allowing the machine to be adapted to perform a wide range of mixing operations including emulsifying, homogenizing, disintegrating, dissolving, dispersing, blending, particle size reduction and de-agglomerating
• Hopper volume: 3.5 cubic feet
• 17.5 horsepower motor
• Electrical:
  • Volts: 230/460
  • Frequency: 60 Hz
  • Phase 3
• 316 stainless steel construction

Approximate overall dimensions: 49.5"L x 39.5"W x 52.5"H