Used Tetra Pak Tetra Centri WD714 Stainless Steel Dairy Separator

The aim of whey separation is to recover fat and make the skimmed whey as free from fat as possible, to facilitate downstream treatment and enhance the value of the whey. When pre-clarified, the whey separation becomes more efficient, resulting in a low fat content in the skimmed whey, down to 0.03 %, depending on whey type. Tetra Centri AirTight whey separators enable you to produce high-fat cream with a fat content above 30 % even at temperatures below 35 °C. There are two types of whey separators: the W type and the WD type. The WD type has a clarification section in the bowl that makes it possible to utilize pre-filtered whey (without using a whey clarifier first), which has a higher fines content. This enables longer run times with a slightly lower efficiency. 

Used Tetra Pal Separator with: 

• Pre-filtered flow rate: 5000 gallons per hour
• Sediment space: 2.5 gallons
• Connection inlets: 2.5 inches
• Overall dimensions (inches):
  • Length: 110
  • Width: 110
  • Height: 110
• Overhead hoist kN: 10
• Gear drive
• Hermetic inlet seal
• Hollow spindle
• Integrated cooling and seal water
• Stainless steel construction
• Installed motor power: 22 kW
• Inlet max pressure: 97 PSI
• Outlet max pressure: 97 PSI