Used KM Grandpack 12 Basket Static Steam Retort With Manual Loading

The KM Grandpack 12 Basket Static Steam Retort with Manual Loading is a high-performance, reliable solution for food processing and preservation. Designed for optimal heat distribution and consistent results, this retort ensures product quality while maximizing operational efficiency. With a manual loading system, it offers flexibility and ease of use, making it an ideal choice for medium to large-scale production. Built with durable materials and advanced technology, the Grandpack 12 provides excellent value for businesses seeking a cost-effective and dependable retort to meet their steam sterilization needs.

Used KM Grand Pack Retort with:

• Style:
  • Static
  • Steam
• Capacity: 12 baskets
• Pressure rating:
  • MAWP: 43.5 PSI at 302° F (300 kPa at 150° C)
  • MDMT: 32° F at 43.5 PSI (0° C at 300 kPa)
• Basket dimensions (inches):
  • Length: 40
  • Width: 32
  • Height: 27.5
• Chamber dimensions:
  • Length: 41 feet
  • Diameter: 48 inches
• Overall dimensions:
  • Length: 44 feet
  • Width: 54 inches
  • Height: 54 inches
• Infeed:
  • 2 Doors, Manual Swing Door
  • Basket “Roller” rails with double stainless steel chain no. 80 and gear motor drive 3.0 HP for basket loading/unloading
  • Double door locking system for safety once vessel has pressure inside
• Insulation: Thermal insulation 50 mm thick by rockwool 80K and mirror polished stainless steel cladding 0.7 mm thick.
• Block and bleed valves for air and water
• Sight glass with sensors for water level control
• Steam valve: brand "Spirax Sarco", type LE33 with body in cast iron
• Compressed Air Valve: brand "OMAL"
• Safety Valve: Brand "ARI" x 2 set (ASME U-stamp)
• Pressure Gauge: pressure guage in stainless steel cage 0-6 Bars
• Vessel Pressure Sensor: brand "ESI" Model "GS4200"
• MIG Thermometer: brand "Taylor" ,Scale 75-135 C.
• Digital Thermometer: brand "Wahl" online
• Circular Chart Recorder: brand "Honeywell" Model "DR4500AT" , with 1 pen for  temperature recording
• ASME: ASME U-Stamp Certificate with National Board No. Registration to meet pressure vessel regulation in GA including engineering, manufacturing, testing, Inspection to ASME Section VIII, Division I, Edition 2021.
• Control system: Allen Bradley programmable logical controller (PLC) Model Micrologix 1400 for fully automatic operation 
• Construction: stainless steel SUS 304 6mm thick
• Electrical:
  • Operating requirements: 3 phase, 60 hertz, 480 volts
  • Control voltage: 120 volts (transformer included in control panel)
  • Signal voltage: 24vdc (power supply included in control panel) 

Last application: Tuna cans at a 5, 7, and 12 ounce weight. Typically cycle was 2 hours and 45 minutes. 4 pound product was also ran on this a 5 + hour cycle.