Used C&D Palletizer with Gantry Robotic System

Used C&D Palletizer with Gantry Robotic System with:

• Air requirements: clean dry air, 80 PSI, 25 CFM
• Bundles must be tightly strapped or wrapped with no loose shrink-wrapping or straps on the long sides. Plastic "Ears" on the ends are less than 1 inch (25 mm)
• Maximum bundle taper, due to inserts, must not exceed 5 degrees
• Right hand "Z" with input on left and output on right
• Maximum pallet load: 2000 pounds (900 kg)
• Bundle height range: 0.75 inch to 11 inches (19-280 mm)
• Maximum pallet load height (including pallet) is 54 inches (1370 mm)
• Overall bundle dimensions, not trip dimensions: 
  • 5 inch to 10.75 inch width
  • 7.25 inch to 12.75 inch length
• All pallet loads are column stacked
• Eight pallet capacity in automatic pallet dispenser
• Two pallet loads accumulation on gravity discharge conveyor
• Programmable features:
  • Piling patterns and change of product size. All products are stacked in columns (requires guide box change and mechanical make ready)
  • Stretch wrapping for achieving the desired load stability
• Gantry robotic system:
  • Closed Gantry four axis robot
  • Box type end effector
  • C&D motion controller
  • Stretch wrapper service door
• Perimeter fencing
• Service platform with stairs
• Bundle wrapper service door
• Bundle transport system
  • Infeed conveyor
  • Package conveyor
  • Bundle conveyor
  • Height gauge
  • Collection box
  • Guide box
• Pallet transport system
  • Pallet dispenser for postal pallets
  • Scissors lift and load station conveyor
  • Stretch wrapper
  • Gravity roller conveyor