Used Equipment


13653 Used Items
Page 161 of 911

Search Within

Put our team on the search!

The SIGMA acquistions team can help find what you're looking for.

A-CB2000-96 photo
Ace Roto-Mold 2000 Gallon Poly Tank With Cone Bottom

Use Ace Roto-Mold Tank: Capacity: 2000 gallons Mounted on stand 16 inch diameter manway Cone bottom Bottom Outlet: 2 inch female NPT bulkhead fitting Dimensions with stand: diameter: 96 inches height:...

unknown photo
RBM 14.5" Wide Cleated Incline Conveyor

RBM Table Top Cleated Inclined Conveyor with: Variable speed controller Total conveyor dimensions: 100 inches long x 14.5 inches wide Infeed section: 30 inches long Incline section: ...

TBS100FC photo
Combi Ergopack Left to Right 3CE Erector-Packer- TB1 Sealer-System

Used Combi Ergopack 3CE Erector-Packer-TBF Sealer System with: Closure Type: top and bottom 3M Accuglide 2" Tape Head Product infeed conveyor: Length: 156 inches Width: 12 inches Left to right...

XT-300/8006100 photo
Paxton Power Dry Ionized Air Bottle Dryer/Rinser With Variable Frequency Drive

Paxton’s PowerDry drying system sets the standard for complete blow-off cleaning and drying systems. This affordable system uses significantly less energy than a compressed air system (or thermal processes) while...

KMF-8 photo
Bran + Luebbe Pentax KMF-8 Stainless Steel Inline Dynamic Mixer

Used Bran + Luebbe Inline Mixer with: Multi-frequency, inline mixer/emulsifier Capacity/output: up to 200 gallons per hour Rotation speed: Minimum: 500 rotations per minute Maximum: 4,500 rotations...

unknown photo
Lee 200 Gallon Direct Steam Kettle With Perforated Cooking Basket

Lee Kettle: Capacity: 200 gallons Direct steam heated Jacket rating: 90 psi at 650° F Lift up perforated cooking basket Hinged lid 2 inch drain outlet Stainless steel construction

 photo
Laughlin Corp Cleated Incline Conveyor 10" Wide

Used Laughlin Corp Cleated Incline Conveyor with: Infeed height from ground: 17 inches Discharge height from ground: 50 inches Cleat dimensions: 10 inches wide x 3 inches tall Stainless steel construction...

TECHLINE VERTICAL photo
Quadrel Techline Vertical Can Wraparound Labeler

Used Quadrel Labeler Techline Vertical Can Wraparound Labeler with: Output: up to 150 bottles per minute (depending on product size) Conveyor dimensions: 3.5 inches wide x 150 inches long (12.5...

JR-6S2540 photo
Junapack JR-6S2540 Stainless Steel Horizontal Premade Pouch Fill and Seal

Used Junapack Premade Pouch Horizontal Fill and Seal with: Speed: 10-30 pouches per minutes, depending on products , pouch type, size and filling volume. Pouch sizes: Width: 250-400mm Length: approximately...

IDS-55 photo
Drumbeaters IDS-55 Electric Industrial Plastic Drum Saw

Used Drumbeaters IDS-55 Electric Industrial Plastic Drum Saw with: Accomodates 55 gallon drums 4 saw blade design Infeed dimensions: Height: 52.5 inches Width: 46 inches Discharge dimensions: ...

 photo
7" Wide Stainless Steel Cleated Inclined Conveyor

Used Cleated Inclined Conveyor with: Infeed: 5 inches from ground Discharge: 60 inches from ground Cleat dimensions: 7 inches wide x 2 inches tall Cleat centers: 10 inches 1/4 horsepower...

 photo
Stainless Steel Cleated Inclined Conveyor 7.5" Wide

Used Stainless Steel Cleated Inclined Conveyor with: Infeed: 5 inches from ground Discharge: 44 inches from ground Cleat dimensions: 7.5 inches wide x 2 inches tall Cleat centers:...

 photo
77" Long x 24.5" Wide Stainless Steel Dimpled Shaker Table

Used Stainless Steel Dimpled Shaker Table with: Dimpled trough Trough dimensions: 24.5 inches wide x 77 inches long x 4 inches deep Infeed/discharge height: 40 inches from ground 1/4 horsepower...

B-350e photo
All-Fill B-350E Semi-Automatic Auger Filler

Used All-Fill B-350E Semi-Automatic Auger Filler with: Hopper capacity: 10 gallons Motor: 1.5 horsepower, 1,200 rpm Set for size 38, free flow powder system 10 product memory Stainless steel construction...

NJP-800 photo
iPharmachine NJP-800 Stainless Steel Automatic Capsule Filling Machine

Used iPharmachine NJP-800 Stainless Steel Automatic Capsule Filling Machine with: Output: Up to 800 capsules per minute Capsule sizing: Minimum: #00 Maximum: #5 Number of mould bores: 6 each ...

Showing 2401-2415 of 13653 Items

Enter your email address to get started.