Used Equipment


13748 Used Items
Page 750 of 917

Search Within

Put our team on the search!

The SIGMA acquistions team can help find what you're looking for.

HPE/RH/DL photo
Marq HPE/RH/DL Tape Bottom Seal Case Erector

Used Marq HPE/RH/DL Tape Bottom Seal Case Erector with: Up to 15 cases per minute Erects and seals bottom of RSC (regular slotted containers) cases with tape Case knock downs are placed in the magazine,...

215-4/RH/DL photo
Marq HPE 215-4/RH/DL Tape Bottom Seal Case Erector

Used Marq HPE 215-4/RH/DL Tape Bottom Seal Case Erector with: Automatically erects and bottom tapes cases Knockdown cases are loaded into the magazine. Suction cups grab the case off the top of the stack...

DC-6 photo
Vulcan DC6 2 x 5 Gallon Jacketed Kettle System

Used Vulcan Kettle System with: Capacity: Per kettle: 5 gallons Total capacity: Quarts: 40 Gallons: 10 Applies to both kettles: Jacket: Coverage: half Rated:...

 photo
Process Equipment 1200 Gallon Stainless Steel Tank

Used Process Equipment 1200 Gallon Stainless Steel Tank with: Side and bottom dimple jackets Closed top with 1/3 Hinged side cover 72 Inch diameter tank with 68 Inch sidewall Stainless steel top bridge...

DP3-1 photo
Climax Packaging Machinery DP3-1 Drop Packer

Used Climax Packaging Machinery DP3-1 Drop Packer with: Previous application: bottles of wine Smallest case size: 8 inches long x 8 inches wide x 3 inches high Largest case size: 22 inches long x 15...

SH-1 photo
Mikro Pulverizer Horizontal Screw Feed Hammer Mill

Used Mikro Pulverizer Mill with: Single screw feed Gravity infeed from hopper Feed screw: Stainless steel Diameter: 1.750 inches Driven by 0.25 horsepower variable speed drive motor Mill...

KDG photo
Fitzpatrick KDG 6" Stainless Steel Hammer Mill

Used Fitzpatrick Mill with: Features stainless steel and stainless steel plated: Mill Rotor Feed throat Rotor blade assembly: 16 fixed blades with bolt on tips Discharge height: 26...

UAS06 photo
Fitzpatrick UAS06 Stainless Steel Hammer Mill

Used Fitzpatrick Mill with: Includes: Hopper: 0.5 cubic foot capacity Screw feed: 3 inches diameter Rotor blade assembly: Number of hammer blades: 16 Fixed blades Removable...

RP-6-K115 photo
Rietz RP6 K115 Stainless Steel Disintegrator Mill

Rietz Disintegrator with: Rotor assembly: Number of blades: 12 Standard angular position Feed throat diameter: 5.5 inches Discharge: Dimensions (inches): 13.5 x 1.75 Discharge...

J-6 photo
Fitzpatrick J6 Stainless Steel Homoloid HammerMill

Used Fitzpatrick Mill with: Features: Swing hammers Knife blade on one side, blunt on opposite side Direct to mill infeed: 3 inches with tri-clamp connection Discharge: 33 inch clearance...

 photo
De Laval 97 Plate Stainless Steel Heat Exchange

Used De Laval Heat Exchange with: 97 plates Inlet diameter: 2 inches Outlet diameter: 2 inches Previous application: ice pop flavoring Expandable design Stainless steel construction

CS-320/350-IIA photo
Netzsch CS-320/350-IIA 3 Blade Fine Cutting Mill

Used Netzsch CS-320/350-IIA Mill with Cutting compartment dimensions: 14 inches long x 13 inches wide x 14 inches deep (3) blade milling design 20 horsepower motor Stainless steel blades Belt...

3/4 photo
J.H. Day 2 Gal Laboratory Double Sigma Mixer

Used J.H. Day 3/4 2 Double Sigma Mixer with: Capacity: approximately 2 gallons Stainless steel internal construction Manual switches Hinged lid Double sigma mixing blades Tabletop mounted

VS 400R photo
Cherry Burrell VS 400R Instant Ice Cream Freezer

Used Cherry Burrell VS 400R Instant Ice Cream Feezer with: Output: 400 gallons per hour Refrigerant: ammonia Inlet: Diameter: 1 inch Bevel seat Outlet: Diameter: 1.5 inches...

 photo
Goring Kerr 5 Inch Aperture Height Metal Detector

Used Goring Kerr 5 Inch Aperture Height Metal Detector with: Aperture: Height: 5 inches Effective height: 4 inches Width: 12 inches Conveyor: Width: 10 inches Length: 88...

Showing 11236-11250 of 13748 Items

Enter your email address to get started.