Search Terms:  "weiler 50 hp meat grinder"

  Plastics Equipment ×

10 Used Items
Page 1 of 1

PLASTIC INJECTION MOLDING is a method to obtain molded products by injecting plastic materials molten by heat into a mold, and then cooling and solidifying them. The method is suitable for the mass production of products with complicated shapes, and takes a large part in the area of plastic processing. (pool chemical buckets, aerosol caps, plasticware, legos) BLOW MOLDING is a process for forming plastic objects in which plastic is melted, put in a mold, and then shaped by having compressed air blown into it. (Water bottles, shampoo bottles, orange barrels/cones) EXTRUSION is a process of converting a solid plastic mass, pellet or powder into a melted form where it is pushed through a die into a shape. This shape is then moved through various secondary operations where it is cooled then cut, coiled or experiences a variety of other possible operations. (PVC water and sewer pipes, plastic tubing for oxygen, drinking straws) There is a uniqueness to each primary process. Extrusion is continuous, injection molding is discontinuous and blow molding would also be considered continuous.


Start Your Project

30:1 L/D photo
Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder

Used Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder with: Maximum safe operating pressure: 10,000 PSI Maximum safe operating temperature: 550 degrees Fahrenheit 52 inch centerline 200 horsepower, 500...

ES-1050 250 HL photo
Engel ES1050 250 HL Ton Injection Molding Machine

Used Engel Injection Molder with Clamp force: 250 tons Tie-bar clearance: 1050 x 650 Screw diameter: 50 mm / 2 inches Calculated shot volume: 422 cm³

1000 DH 2 photo
CMPP 1000/D/H/2 Extrusion Blow Mold Machine

Used CMP 1000/D/H/2 Extrusion Blow Mold Machine with: De-Flashing system Screw Diameter - 50 mm Blowing capacity - 10 ml Screw Speed:0-75 Maximum Die Diameter - 60 mm Oil Tank Capacity - 200...

 photo
Entwistle 2 Inch Plastic Extruder 9 Cooling Zones

Used Entwistle Plastic Extruder with: 9 zones 24:1 L/D 50 horsepower motor In feed diameter: 3.5 inches Digital temperature controls Independent zone controls

350 R-2 photo
Uniloy 350 R-2 Blow Molding Machine 4 Heads

Used Uniloy 350 R-2 Blow Molding Machine with: 4 heads Distance between heads: 8 inches Capacity: from 1 to 4 liters Shoot size: 1100 grams 50 CFM Previously produced dairy bottles

350 R-1 photo
Uniloy 350 R-1 Blow Molding Machine 4 Heads

Used Uniloy 350 R-1 Blow Molding Machine with: 4 heads 8 inches between heads Capacity: from 1 to 4 liters Shoot size: 900 grams 50 CFM Previously produced dairy bottles

350-30 3.5��� photo
Welex 350-30 3.5 Inch Five Barrel Plastic Extruder

Used Welex 350-30 3.5 Inch Five Barrel Plastic Extruder with: 5 barrels with one adapter 4 die zones BC-580 temperature controls Non-vented barrel at 50 inches centerline Lufkin gear box ratio...

MH250-13 photo
Cincinnati MH250-13 250 Ton Injection Molder

Used Cincinnati MH250-13 250 Ton Injection Molder with: Capacity: 250 Tons Shot Size: 13 ounces Platen Size: 30.7 inches x 30.7 inches Tie Bar Spacing: 22.05 inches x 22.05 inches Clamp Stroke: 29.55...

AGVU-05 photo
Hartex AGVU-05 Stainless Steel Pelletizer

Used Hartex Pelletizer with: Throughput: 20 pouds per hour Finished product size (approximate): Height: 0.5 inches Diameter: 0.25 inches Discharge dimensions: Length: 10 inches...

3518-D photo
Egan 3.5 Inch Extruder for Plastics

Used Egan Extruder with: 24:1 L/D ratio Gearbox: Ratio: 11.48:1 Horsepower: rated to 265 hp 3.5 Inches diameter feed throat Centerline: 42 inches New: Air cooled heat bands Cooling...

Showing 1-10 of 10 Items

Enter your email address to get started.