Description
Used VirTis 25L General Purpose Freeze Dryer 24DX48 with:
- Compact, freestanding and mobile design.
- Clear acrylic product and condenser chamber doors.
- Optional programmable heat allows for chamber temperature control to 60 °C.
- IntellitronicsTM controller with manual and automatic drying capabilities.
- Smooth-wall condenser.
- Stainless steel trays.
- Chamber temperature control range:
- Without heat: -29° to 0° C
- With heat: -29° to 60° C
- Lowest condenser temperature (50Hz/60Hz)
- -50° to -53° C
- Maximum condenser capacity: 25L
- Condenser surface area: 506 inches squared
- Maximum ice condensing capacity in 24 hours: 12 liters
- Maximum deposition rate: 0.50 liters per hour
- Number of compressors: 2
- System refrigerant (product chamber): R-404A
- Ambient room temperature: 20°C
- Approximate peak heat generated (without heat): 7,200 BTU/h
- Approximate peak heat generated (with heat): 8,900 BTU/h
- Outside Dimensions:
- width: 34 inches
- depth: 55 inches
- height: 79 inches
- Electrical Requirements:
- volts: 208-240
- frequency: 50/60Hz
- phase 1
- 20 amps
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
