Used PackTest P500DDX 500 KGF Pouch Compression Tester For Liquid/Paste Pouches

Pouch Compression Tester is an equipment suitable to evaluate the overall seal integrity of “liquid” or “paste” filled pouches when subjected to external compressive force.

• Dynamic and Static load tester
• Dynamic:
  • Test type: press until failure
  • In this method, the sample is compressed with increasing force until the pouch bursts
• Static:
  • Test Type: press until load setpoint. hold until the time setpoint
  • In this method, the sample is compressed up to the Load setpoint pre-set by the user. The applied force is held on the pouch for some time (pre-set by the user). After the time elapses, the machine automatically returns to its original position. However, If the pouch bursts before the set point is achieved, then this becomes a destructive test. The machine automatically stops on sample failure or when the preset load time is achieved, whichever is earlier.
• Capacity: 500 Kilograms of force (KGF)
• Pouch dimensions: approximately 8x8 inches
• Electrical:
  • Volts: 230
  • Frequency: 60 Hz
  • Phase 3
• Air requirements: 80 psi
• Protective cabinet with acrylic guarding