Description
The CP intermittent-motion vertical packaging machine is the solution that best reflects your aesthetic needs for the production of sachets sealed on 4 sides. Despite being compact and easy to use, the machine will produce sachets with a high design standard. Change parts can be purchased for the packaging of Powders, Liquids/Pastes, and Tablets
- Omag CP/6
- Last set for 1 gram pouches of powder in a 4 side thermo sealed sachet
- Continuous Motion
- Auger dosing
- 6 Lanes
- Plate sealing
- Output (depending on the application):
- Products per minute: up to 330
- Cycles per minute: up to 55
- Sachet Width: 50 mm-125 mm (change parts may be needed)
- Sachet Length: 50 mm – 220mm (change parts may be needed)
- Print registered
- Touchscreen controls
- Electrical:
- Volts: 440
- Frequency: 60 Hz
- Phase 3
- Air requirements: 6 bar
- Stainless steel construction
- Serpa P150 cartoner
- Intermittent motion cartoning
- Output: up to 80 cartons per minute
- Rotary carton pick off
- Carton range:
- Length: 0.75-4 inches (19.1-101.6mm)
- Width: 0.5-3 inches (12.7-76.2mm)
- Depth: 2.5-7 inches (63.5-177.8mm)
- Glue sealing
- Electrical:
- Volts: 480
- Frequency: 60 Hz
- Phase 3
- Stainless steel construction
- All servo driven
Products: Powders, Granules, Pastes, Liquids, Tablets, Objects
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
