Used Lantech C-300 Auto Tape Bottom Seal Case Erector  OUT ON RENTAL

Used Lantech C-300 Auto Tape Bottom Seal Case Erector with:

• Designed to erect and seal square cases
• Ergonomic blank loading: easy to load magazine can be refilled while machine operates
• Blank deliver control: powered belts precisely govern the delivery speed of the case blanks. Blank retainers ensure the blanks are spaced correctly.
• Blank separation: special separators release only the leading blank to the pickup frame and retain the following blanks
• Square case erecting: eight vacuum powered suction cups hold the blank in the correct position after it leaves the magazine. Both leading panels are held securely.
• Stationary flap folding: once the case is square, it remains square by folding the flaps while it's stationary. This makes the case rigid and locks the 90 degree angles.
• Square case transition: a pusher bar, parallel to the rear wall of the case, pushes it into the sealing section where spring-loaded side belts automatically adjust for any width variations
• Speed: up to 8 cases per minute
• Tape Head: 2 inches
• Minimum case outer dimensions: 200 mm long x 150 mm wide x 150 mm deep including top flaps (7.875 inches long x 5.875 inches wide x 5.875 inches deep)
• Maximum case outer dimensions: 500 mm long x 350 mm wide x 600 mm deep including top flaps (19.625 inches long x 13.75 inches wide x 23.625 inches deep)
• Case type: RSC, HSC, FEFCO 0200/0201
• Flute type: B, C
• Single wall
• Lantech TH series tape head
• Pnuematics: 80 PSI