Description
Used Tablet Filling Line with:
- NJM Bulk Bottle Unscrambler:
- Throughput: up to 90 containers per minute depending on size and application
- Ionized air and dust collection
- Air requirements: 2 scfm @ 80 psi
- Pharmafill PS! Desiccant Inserter:
- Speed: up to 100 packets per minute depending on conveyor speed and application
- Packet capacity:
- Minimum: 0.25 grams
- Maximum: 5 grams
- Bottle height range:
- Minimum: 1 inch
- Maximum: 9 inches
- Conveyor:
- Length: 90 inches
- Width: 4.5 inches
- Infeed/Discharge height: 33.5 inches
- Variable speed drive
- Cremer CF-1220 Tablet Counter:
- Production speed: up to 55 containers per minute depending on product and application
- Maximum counting speed: up to 5,500 tablets/capsules per minute depending on product and application
- Minimum container dimensions:
- Diameter: 20 mm
- Height: 40 mm
- Maximum container dimensions:
- Diameter: 120 mm
- Height: 200 mm
- Minimum product size:
- Length: 2 mm
- Diameter: 2 mm
- Maximum product size:
- Length: 30 mm
- Diameter: 20 mm
- Product hopper capacity: 30 liters
- Product infeed height range:
- Minimum: 66.85 inches
- Maximum: 73.54 inches
- Hopper opening dimensions:
- Length: 30.7 inches
- Width: 15.5 inches
- Container infeed/discharge height range:
- Minimum: 34.64 inches
- Maximum 36.22 inches
- Up to 50 programmable recipes
- Touch screen HMI
- Hopper product level detection
- 12 channel infrared product detection
- FDA-Compliant contact parts
- Required air quality: ISO8573-1
- Air pressure requirements: 5 bar (70 psi)
- Electrical: 1 Phase, 50/60 Hz, 230 Volts
- Kaps-All E4 Spindle Capper:
- Production speed: up to 80 bottles per minute depending on size and application
- Cap size range:
- Minimum: 13 mm
- Maximum: 70 mm
- Number of spindles: 4
- FSRF-24 rotary cap feeder
- Bowl diameter: 24 inches
- Kaps-All Mini-L cap elevator
- Hopper capacity: 3 cubic feet
- Air requirements: 2 - 4 cfm
- NJM CONVD11-S015 Bottle Indexing Conveyor:
- Conveyor belt dimensions:
- Length: 120 inches
- Width: 4.5 inches
- Infeed/Discharge height: 36 inches
- Variable speed drive
- Product indexer timing wheel
- Pneumatic reject
- Conveyor belt dimensions:
- AutoMate AM-250 Induction Sealer:
- Seal head:
- Length: 21 inches
- Width: 3 inches
- Conveyor:
- Length: 157 inches
- Width: 4.5 inches
- Infeed/Discharge height: 33.5 inches
- Variable speed drive
- Seal head:
- NJM TAT36ACC-S006 Rotary Accumulation Table:
- Table diameter: 36 inches
- Infeed height: 36 inches
- Infeed width: 9 inches
- Guide rail height: 3 inches
- Variable speed
- Overall dimensions of production line:
- Length: 50.6 feet
- Width: 6 feet
- Height: 7.2 feet
- Footprint: Approximately 303.6 square feet
Previously used in pharmaceutical co-packing tablet filling, capping, and sealing application
Previously running a 60cc bottle with 38mm child-resistant induction sealed cap
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
