Description
Used Apeks Supercritical 5000-5L Extractor with:
- Processing capacity: 10 to 14 pounds of dried, ground material per 24 hour period
- Extractor vessel:
- Capacity: 5 liters
- Flow rate: 0.4 to 0.8 kilograms per minute
- Maximum operating temperature: 160°F
- Maximum operating pressure: 4800 psi
- Maximum jacket operating pressure: 100 psi
- Integral 20 micron filter
- 304 stainless steel construction
- Separator vessel 1:
- Capacity: 10 liters
- Maximum operating temperature: 160°F
- Maximum operating pressure: 600 psi
- Maximum jacket operating pressure: 100 psi
- 304 stainless steel construction
- Sanitary gasket, cured silicon sealing mechanism
- Separator vessel 2:
- Capacity: 5 liters
- Maximum operating temperature: 160°F
- Maximum operating pressure: 600 psi
- Maximum jacket operating pressure: 100 psi
- 304 stainless steel construction
- Sanitary gasket, cured silicon sealing mechanism
- Heat exchangers:
- Design: tube-in-tube
- Cooling/heating media: water
- 304 stainless steel construction
- Chiller/Heater:
- Type: recirculating
- Temperature range: 14°F to 158°F
- System operating range: 60°F to 140°F
- Fully automatic PLC touchscreen controls
- UL-508A listed
- Compressor motor: 7.5 horsepower
- Electrical requirements: 230 volts, 60 hertz, 1 phase
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
