W2 Systems Waste Water Treatment System W/ Watermark SPC-10

Description:

W2 Systems Water Treatment System with Watermark Incline Plate Clarifier with:

• Effluent output: up to 15 gallons per minute depending on application
• Tank capacity: 300 gallons
• Tank dimensions:
  
  • Width: 28 inches
  • Height: 68 inches
• Overall dimensions: 
  • Length: 47 inches
  • Width: 71 inches
  • Height: 110 inches
• Infeed height: 78 inches

Watermark SPC-10 Incline Plate Clarifier:

• Nominal capacity: 10 gallons per minute
• Overall dimensions:
  • Length: 60 inches
  • Width: 36 inches
  • Height: 75 inches
• Infeed height: 63 inches
• Interior coating materials (5 millimeter DFT):
  • (1) One application of white polyamide epoxy
  • (1) One application of black polyamide epoxy
• Exterior coating materials (6 millimeter DFT):
  • (1) One application of blue polyamide epoxy
• Two (2) paddle agitators
• Flash mix tank volume: 4.5 gallons
• Flocculation tank volume: 20.5 gallons
• Total pre-treatment volume: 25 gallons
• Effluent piping connection: 3" 150# Flange
• Solids discharge connection: 3" 150# Flange
• Sludge capacity: 42 gallons
• Plate area: 39 square-feet
• Projected plate area: 23 square-feet
• Liquid volume: 177 gallons
• Retention time @ maximum flow rate: 18 minutes
• Gallons / square-foot: 0.43
• Design Solids Removal: 95+% @ 200 PPM influent
• Underflow Solids: 1 - 2% solids
• Agitator motors (2): 0.25 and 0.5 HP, 230/460 V, 60 Hz, three-phase
• Panel electrical: 120 VAC, 60 Hz, 20 FLA, single phase