Transfer to filler via Ampco positive displacement pump
VARO HPT Skid for a 12 GPM system
Batch processing (500 liter batches)
Retention of natural and vivid product colors, textures and flavors
Ability to temporarily halt product without product loss
Horizontal cooker with a double jacket for heating and cooling of the product (steam and water)
Temperature: 289° F
Volume of one batch: max. 500Lper minute
Equipped with an agitator, which allows removal of the product from the inner walls of the cooker (PEEK scraper) and allows rapid heating and cooling of the product (coil to be used with steam/ hot and cold water). The speed of rotation of the agitator is adjustable between 6 and 16 rpm.
3.2 bar/46.5 psi over-pressure and vacuum.
Manway cover will include a safety proxy switches.
ASME certified rupture disc with sensor.
Vent assembly for high/ low flow.
Level sensor to indicate tank level contents.
All contact surfaces are stainless steel SA-240 316L and finished to 30Ra
All other is made from stainless steel SA-240 304, except certain components such as gear, bearings, etc
Insulation of vessel: 2 inch fiber glass and covered with 12 gauge 304 stainless steel. End pieces have no insulation.
