6 Lane Liquid Stickpack Machine with Cartoner & Robotic Case Erector, Packer, & Palletizer

Description:

Liquid Stickpack System with:

• Pressurized AISI-316L Stainless Steel 25 Liter Hopper:
  • Hygienic clamp connection for installation of the level sensors
  • Full CIP system
  • (5) clamps for tank cover
  • Tank pressure: between 3 and 6 bar depending on application
  • Relief valve
  • Pressure gauge
  • Pressure regulator
  • Vibration Level sensor 
  • AISI-316L stainless steel construction
• INV Pack 6 Lane Stick Pack Machine:
  
  • Production output rate:
    • Up to 50 stickpacks/lane per minute (depending on application) 
    • Up to 300 stickpacks per minute (depending on application)
  • Current stickpack specifications:
    • Liquid (5.7 mL) 
    • Bag size: 
      • Length: 75 mm
      • Width: 50 mm
  • High-precision forming shoulders for 3-sided seal
  • Horizontal tear notch and side
  • Horizontal diamond-tipped sealers
  • Horizontal straight cut station
  • Photocell for vertical film centering
  • Reel splicer table
  • Ultrasonic spliced reel detection system
  • Reel automatic alignment system
  • End of reel alert
  • Centralized side seal trimmer
  • Scrap foil aspirator
  • Masca K1030-HDP Laser Coder
  • Nitrogen gas detection system
  • Air pressure installation: 
    • Working pressure: 6 bar
    • Maximum pressure: 7 bar
    • Consumption: 1000 l/m
  • 316 stainless steel contact parts
  • Electrical: 480 volts, 60 hertz, 3 phase
• Mpac Langen Automatic Glue Horizontal Cartoner:
  • Carton speed: up to 10 cartons per minute (depending on application)
  • Current carton dimensions: 
    
    • Length: 150 mm
    • Height: 55 mm
    • Depth: 75 mm
  • Product shape: rectangular
  • Operating temperature: > 5°C (41°F) and < 40°C (104°F)
  • Air consumption: 398 Nltr/min
  • Operating pressure of compressed air: 6 bar (87 psi)
  • Electrical: 480 volts, 60 hertz, 3 phase
  • Maximum measured sound level: < 80 decibels
• LRC-700 Robotic Palletizing and Case Packing System:
  • Cartons received upstream at maximum rate of 17 cartons per minute
  • Fanuc M-710/50H Robotic Arm:
    • Maximum payload: 50kg
    • R-30iB controller with HandlingTool Software
    • Vacuum suction operation 
    • Maximum reach: 2050 mm
    • 5-axes motion
    • Motion range: 225 to 720 degrees
    • Floor mounted
  • Robot End-of-Arm tool to pick both carton and cases
  • Robot Work Cell enclosure:
    • Wire mesh fence
    • Safety interlocked access doors
    • Guarding to comply with category 3 safety requirements