Frigoscandia GYRoCOMPACT GCM10TC/3 08-34-36 NS CCR Spiral Freezer
Spiral Freezer
Manufacturer:Frigoscandia
Availability: Available
Location:New Britain, CT
Equipment #:E326130
Description:
Used Frigoscandia GYRoCOMPACT GCM10TC/3 08-34-36 NS CCR Spiral Freezer with:
- Spiral stack:
- Conveyor dimensions:
- Width: 42 inches
- Active belt length: 1,115 feet
- Number of tiers: 34
- Active belt area: 3657 square feet
- Maximum product clearance: 2.375 inches
- Link height: 800 millimeters
- Counter current vertical air flow
- Counter clockwise rotation
- Conveyor dimensions:
- Evaporator and Fans:
- Stainless steel evaporator stand
- Stainless steel tube/aluminum fin evaporator
- Refrigeration requirement: 105 tons at -40°F
- Nominal coil rating: 190 TR
- LVS refrigerant feed system
- Ammonia refrigerant
- Hot gas and/or water defrost
- Aluminum fan blades housed in stainless steel frames
- Enclosure, Floors, and Decking:
- Stainless steel modular floor
- Polystyrene floor insulation
- Electric floor heating cable
- Stainless steel plenum and aluminum mezzanine
- Level 1 caulked enclosure
- 4 inch thick polyisocyanurate walls
- Plug door for fan motor removal
- LED lighting package
- Stainless interior and white enamel exterior
- Overall dimensions:
- Length: 36 feet 9 inches
- Width: 15 feet 9 inches
- Height: 15 feet 1-1/8 inches
- Infeed elevation: 2 feet 5-3/8 inches
- Outfeed elevation: 12 feet 4-3/45 inches
- Controls:
- Touchscreen control panel
- NEMA 4X stainless steel enclosure
- Allen Bradley PanelView 1000 Plus HDMI
- Allen Bradley Powerflex 525 VFD for drives
- Allen Bradley PLC with (2) ethernet ports
- Touchscreen control panel
- Auxiliary:
- Product height limiter with sensor
- Fan driven air balance tunnel
- Automatic air balance control
- Stainless steel site built floor
- Clean-in-place system/standard duty
- Satellite cleaning system
- Extended infeed with belt defroster
- Air defrost system with air dryer and receiver
- Plug door for fan motor removal
- Product and project specific inclusions:
- Stainless steel main fan motors
- Stainless steel outfeed motor, belt dryer, and air balance motors
- Moving access door
- VFD's for each fan with manual bypass capability
- Sloped top on control panel, pneumatic panel, and CIP cabinet
- Alternative mezzanine hatch
- Additional CIP circuits
- Solid UHMW rails where structurally possible
- Drip pan beneath belt dryer motor
- Tray for CIP chemicals
- Alternative scraper design with standoffs
- Additional clearance between outfeed motor and guarding/enclosure
- Additional door for access to clean between infeed and wall
- Air balance tunnel designed to eliminate rivets
- Guards upgraded for easy removal
- Relocate outfeed motor to allow for improved hygiene and clean ability
- Freezer Utility Requirements:
- Spiral conveyor, fans, evaporator and controls:
- Power: 61 kilowatts
- Potable water: 72 gallons per minute at 59°F, 45 psi
- Cleaning system:
- Power: 7.6 kilowatts
- Potable water: 26 gallon per minute at 140°F, 51 psi
- Air requirements: 16 square cubic feet per minute at 65 psi
- Air defrost system:
- 39 square cubic feet per minute at 101.5 psi
- 86°F pressure dewpoint
- Spiral conveyor, fans, evaporator and controls:
