Output: Up to 400 pouches per minute, depending on application
Air pasteurizing system with holding:
Pouch position into belt: 4 pieces across (side by side) |□□□□|
Pouch max dimensions: (L) 140 x (W) 84 x (H) 40 mm
Pasteurizer holds filled pouches at 192°F (core temperature) for 5 minutes
Air temperature inside: Up to 220°F
Primary Thermal Fluid: steam at max 6 bar (min 3 bar)
SPIRAL design and technical data:
Belt width: approximately 800 mm
Drum diameter: 4000 mm
Number of drums: 1
Number of tiers: 8
Tier pitch: 150 mm approx.
In feed height: 1900 ±100 mm
Out feed height: 900 ±100 mm
Cabin max height: 10 feet
Air cooling system:
Cooler cools down the pouches to 90°F (core temperature)
Dwell time: 20 minutes (adjustable)
Air cooling temperature: 40°F (adjustable)
Primary Thermal fluid: chilled water between 28°F–32°F
SPIRAL design and technical data:
Belt width: ~800 mm
Drum diameter: 5000 mm
Number of drum: 1
Number of tiers: 24
Tier pitch: 150 mm approx.
In feed height: 3600 ±100 mm
Out feed height: 900 ±100 mm
Cabin max height: 15 feet
Pouch accumulation:
To collect the pouches in case of any stoppages of the secondary packaging, working with logic FIFO (First in First out). Buffer – accumulation capacity: ~ 7 minutes (±10% tolerance depending on the pouch handling conditions) composed of:
Stailess steel frame with sliding guides with low friction coefficient plastic material
Adjustable feet
Plastic flexible belt composed with modular belt type food grade in plastic material. The belt allows for good product support and high air cross-flow
2 POUCH ALIGNERS AND ACCELERATING BELTS
To increase the interspace between the rows due to the high speed of the filler (25-26 m/min) vs the lower speed of the secondary packaging (15-16 m/min). One system is posizioned just after the pouch filler, the second one just before the secondary packaging input. The system is totally automatic and fully equipped of sensors for a perfect pouch handling. Composed of:
Stailess steel frame with sliding guides with low friction coefficient plastic material
Adjustable feet
Plastic flexible belt composed with modular belt type food grade in plastic material.The belt allows for good product support and high air cross-flow.
Systems are designed to be in an insulated room. None of the insulation panels are included in the system.
Photos are representative, screenshots of unit drawings included
