Used CP Packaging Gen 1 VisionPak Rollstock Thermoformer with:
The VisionPak machine takes semi-rigid and rigid film applications. The film is loaded onto the bottom film mandrel and fed into the transport chain. The machine then forms the film into the desired package. When the bottom form has been made, the transport chain carries the film into the loading zone. In the loading zone, the product is placed into the package. After the package is loaded, the clip chain carries the package to the sealing station. Top film is brought against the bottom film and sealed in the seal station. Upon exiting the seal station, the package travels through the cutoff area and is discharged from the machine.
Currently set up to seal a 12.31" x 16.213" - see attached documents for CAD drawing
Package 12.3125" index 1 x 1 vacuum
Output: up to 14 cycles per minute
Sealing dimensions:
total (set of 4): 12.813" long x 16.713" wide
individual: 5.656" wide x 7.607" long
81 inch long loading section
54 inch long forming section
Discharge height from ground: 35.5 inches
Main vacuum: Busch 25 horsepower
Forming pump: busch 5 horsepower with 3" NPT vacuum fitting
