The single products arriving flat laying from the main production machine, are twisted by 90 degrees by a flat belts system so to be positioned on an edge position. The products are then led inside the paddles chain without any stop w here they are counted. As soon as the complete products arrive at the discharge area, the pusher is transferring it to feeding area of the bagging machine. The bagging machine receives the products on the loading area from the horizontal stacker and moves them towards the feeding station by means of bars. Products are timed with the pusher which, after the compression, transfers them to the bagging area. The polyethylene bag is opened by suction cups while the spreader plates, moving into the bags, keep it open. The pusher introduces first the compressed products inside the bag and then transfers the obtained package to the sealing station. While the bag is kept locked, its bottom is gussetted and sealed. The waste is removed from the package and then sucked; the final bag is automatically ejected from the machine.
Used Amotek MOD IS 81 Bagging Stacker Line with:
Speed: up to 50 packages per minute, depending on product features and bag configuration
Free inlet product dimensions:
Length: 140 to 180 (millimeters)
Width: 100 to 150 (millimeters)
Thickness: 8 to 35 (millimeters)
Outlet multipack dimensions:
Length: 100 to 500 (millimeters)
Width: 140 to 560 (millimeters)
Height: 100 to 150 (millimeters)
Speed at stacker input:
Minimum: 200 products per minute
Maximum: 600 products per minute
Speed at stacker output: up to 55 ejections per minute
