Search Terms:  "stainless tanks"

  Piston Filler ×

121 Used Items
Page 1 of 9

These units use a piston to measure and control product amounts for filling. These have an adjustable range set for each unit. The type of product this unit fills is high and low viscosity liquids.


Start Your Project

 photo
Federal 6 Head 2.5 Gallon Filler with Balance Tank

Used Federal 6 Head 2.5 Gallon Filler with Balance Tank with: 6 filler heads Balance tank included Two (2 )and a half gallon filler

 photo
Custom 24 Station Rotary Piston Filler W/ Tank

Used 24 Station Piston Filler W/64 Gallon SS Hopper with: Previous application: soup can filling 24 Station piston filler Currently set to run a 211 x 304 can size Hopper tank: Capacity: 64 gallons...

W090E photo
Weckerle W090E Semi Auto Lipstick Filling System

Used Weckerle W090E Semi Auto Lipstick Filling System with: Output: 1200 - 1400 pieces per hour Minimum light: 400 lux Dosing tank: 25 liters Warm water tank: 25 liters Cold water tank: 25 liters ...

D150S photo
Turbo Systems D150S Jacketed Piston Filler

Used Turbo Systems D150S Depositor with: Single shot depositor Stainless steel construction Re circulation tank Jacketed pipes, nozzles, and hopper Adjustable servomotor piston Adjustable temperature...

LF840-8 photo
Cozzoli 8 Piston Filler Model LF840-8

Used Cozzoli 8 Piston Filler Model LF840-8 with: 600 cc pistons installed 14 gallon tank 16 foot conveyor Container diameter: 7/8in. - 4in. (22mm - 102mm) Maximum container height: 12in. (305mm)...

IVS-6 photo
REB IVS-6 Stainless Steel Inline 6 Piston Filler

Used Reb IVS-6 Stainless Steel Inline 6 Piston Filler with: Number of nozzles: 6 Diving head w liter sized pistons Stainless hopper with triclover fittings Stainless valves with sanitary disconnect...

 photo
IMI 4 Head Inline SS Pneumatic Piston Filler

Used IMI 4 Head Inline Pneumatic Piston Filler with: Conveyor dimensions: 120 inches long x 1.25 inches wide 17 gallons storage tank 4 filling heads Currently set to run 22 ounce bottles Pneumatic filling...

P-TC-CT-100 photo
JC Pardo and Sons P-TC-CT-100 Stainless Steel Depositor

Used JC Pardo and Sons P-TC-CT-100 Stainless Steel Depositor with: Stainless Steel Construction

DFV 6000 photo
Groninger DFV 6000 6 Head Inline Filler

Used Groninger DFV 6000 6 Head Inline Filler: Stainless steel surge tank on frame with Armstrong Series 303 hose station Wilden stainless steel diaphragm pump Block / Bleeder valve with Allen-Bradley...

Twin Pistons photo
Twin Piston Stainless Steel Filling Machine

Used Piston Filler with: Number of nozzles: 2 Pistons: Length: 14 inches Diameter: 2 inches Two filling spouts Pneumatically operated Stainless steel construction mounted on stainless stand...

 photo
Stainless Steel Inline 8 Head Piston Filler

Used Piston Filler with: Pistons: Number of nozzles: 8 Pistons diameter: 2 inches Shut-off nozzles on diving head Rated for hot fill Right to left flow Pin indexing Can fill large...

 photo
Stainless Steel Four Headed Piston Filler

Used 4 Head Piston Filler with: Easily adjustable to maximize production Over sized hopper to handle large amounts of product Cart mounted with casters Stainless steel construction

 photo
Stainless Steel Four Head Piston Filler

Used Four Head Piston Filler with: Easily adjustable Toggle switch controls Cart mounted with casters Stainless steel contact parts

 photo
Pneumatic Stainless Steel Single Piston Filler

Used Piston Filler with: 20 gallon hopper Single piston Foot pedal activation Outfeed diameter: 2 inches Food grade, stainless steel construction

19S photo
Colton Hope 19S Stainless Steel Dual Piston Filler

Used Colton-Hope Filler with: Twin pistons: Diameter: 1.5 inches Maximum stroke: 7 inches Maximum fill: approximately 12 ounces Product hopper: Stainless steel Drain port Dimensions (inches):...

Showing 1-15 of 121 Items

Enter your email address to get started.