Search Terms: "Form, Fill and Seal"
Glue Bottom Seal Case Erector ×14 Used Items
Page 1 of 1
Glue case erectors fold the two bottom minor flaps of an case blank, then apply glue to both of the minor flaps and fold over the major flaps. The formed case is then held for a short time to ensure that the glue dries and hardens, providing a strong seal. Glue sealing of cases can also mean less change outs when compared to tape, saving time during production runs. A glue bottom seal case erector can use either cold or hot melt glue.
Search Within Glue Bottom Seal Case Erector
Wexxar WFH Automatic Glue Bottom Seal Case Erector
Used Wexxar WFH Glue Bottom Seal Case Erector with: Powered blank case magazine with pin and dome case forming plates Output: up to 20 cases per minute, depending on application Case blank dimensions:...
Bemis Packaging 3 Glue Bottom Seal Case Erector
Used Bemis Packaging 3 Glue Bottom Seal Case Erector with: Case size range: Minimum: 7 inches long x 5 inches wide x 4 inches deep Maximum: 24 inches long x 16 inches wide x 16 inches deep ...
B+ Equipment (Sealed Air) I-Pack BA24B-2 Glue Bottom Seal Case Erector
Used Case Erector with: Minimum case dimensions: Length: 7 inches Width: 5.5 inches Height: 0.75 inches Maximum case dimensions: Length: 35 inches Width: 23.5 inches Height: 23.5 inches...
Pro Pack ProPrint EBS/25G Bottom Seal Case Erector
Used Pro Pack ProPrint EBS/25G Bottom Seal Case Erector with: Production rate: 25 cases per minute depending on materials/application Case size range: Minimum (inches): 8 long x 7.5 wide x 5 high Maximum...
Pearson CE25 Glue Bottom Seal Case Erector
Used Pearson CE25 Automatic Bottom Glue Case Erector with: Case erector designed for erecting and bottom sealing Production output rate: Up to 25 cases per minute Minimum erected case size: ...
Pearson CE25 Bottom Seal Glue Case Erector
Used Pearson CE25 Automatic Bottom Glue Case Erector with: Case erector designed for erecting and bottom sealing Production output rate: Up to 25 cases per minute Minimum erected case size: ...
Wexxar-Bel WFH-SR Automatic Inline Case Erector
Used Wexxar-Bel WFH-SR Automatic Inline Case Erector with: Speed: depending on materials and application Case size range: Length: 6 to 24 (inches) Width: 5 to 16.5 (inches) Height: 3.5 to 16.5 (inches)...
A-B-C 340HM Bottom Glue Seal Case Erector
Used A-B-C Packaging Case Erector with: This case erector is built to manage the special requirements of oversized corrugated cases. It’s built tough, with a heavy tubular steel frame and packed with rugged components...
Wexxar WFH Glue Case Erector
Used Wexxar WFH Glue Bottom Seal Case Erector with: Powered blank case magazine with pin and dome case forming plates Production output rate: Up to 20 cases per minute, depending on application ...
SWF 201 RH Optima Glue Bottom Seal Case Erector
Used SWF Case Erector with: Output: up to 17 cases per minute Case size range: Minimum (inches): 5.57 long x 5.75 wide x 10 deep Maximum (inches)): 24 long x 24 wide x 33 deep Cases: HSC RSC...
Thiele CE442 Bottom Glue Seal Case Erector
Used Thiele Case Erector with: Output: up to 30 cases per minute, depending on case size Case size range: Minimum (inches): 7 long x 5.5 wide x 6.5 high Maximum (inches): 24 long x 16 wide x...
Marq HPE-NS-MF-Tablock(RH)DL Glue Bottom Seal Case Erector
Used Marq Case Erector with: Compatible cases: RSC RSC-Tablock Maximum case dimensions: Length: 24.25 inches Width: 18.25 inches Depth: 12.75 inches Right hand orientation...
Pearson CE25-G Hot Glue Case Erector
Used Pearson Case Erector with: Speed: up to 25 cases per minute Case size: Maximum: Length: 24 inches Width: 16 inches Height: 18.5 inches Minimum: Length: 8 inches Width: 5.5 inches...
Barry Wehmiller/SWF CE-451 Glue Case Erector Up To 40 Cases Per Minute Left Hand Cases
Used SWF Case Erector: Output: up to 40 cases per minute depending on the application Case dimensions (can change with upgraded parts) Length***: 8-20 inches Width***: 5-14 inches Height***: 4-14 inches...
Showing 1-14 of 14 Items