Used Scandia 626 Folded Film Overwrapper

Used Scandia 626 Folded Film Overwrapper with:

• Infeed conveyor
• Tear strip applicator
• Height of package:  
  • Minimum:  5/16 inches
  • Maximum:  2 inches
• Width of package: 
  • Minimum:  3.25 inches 
  • Maximum:  8 inches
• Length of package: 
  • Minimum:  2 inches
  • Maximum:  6-7/8 inches
• Method of Operation: The package is presented to the machine by the gravity hopper and transferred to the Feed Chain. The package is carried through the vertically fed web of film and enters the Side Folding and Sealing Section. The film on the leading edge of the carton is tucked by the stationary Side Tuckers mounted to the package track then folded and heat sealed.  After reaching the end of this section, the package is transferred 90 degrees to the Crossfeed Assembly, where the final folding and sealing of the envelope fold on the trailing side is completed.  The package then exits the machine.
• Film is cut from the film roll, by a Rotary Knife cutting against a Stationary Knife, immediately after the carton has engaged the film are both are trapped between bottom and top plates for positive film positioning.
• Seal jaw: 10" wide
• Personnel guarding
• Stainless steel guarding
• Adjustable height