(812) 303-8383 |   Email Us

Used Angelus Equipment

11 Results
Page 1 of 1

40P DF photo
Angelus 40P DF Can Seamer
Inventory #: D1038

Used Angelus 40P DF Can Seamer with: Tool size: approximately 73 millimeters (2.87 inches) Output speed range: 20-275 cans per minute No can/no cover feed Reciprocating cover separator knife Revolving...

121L photo
Angelus 121L Can Seamer
Inventory #: D1055

Used Angelus 121L Can Seamer with: 12 head Seaming stations Stainless steel castings Rate speed up to 1500 CPM Driven lower lifter oil pump system Automatic Oil Lubrication Recirculating and filtration...

61H photo
Angelus 61H Can Seamer
Inventory #: C9960

Used Angelus 61H Can Seamer with: Fully automatic high speed rotary can seamer Speeds of up to 700 cans per minute Six (6) spindle turret Stainless steel base 211 diameter steam change parts ...

10P photo
Angelus 10P Single Head Can Seamer
Inventory #: C9850

Used Angelus 10P Single Head Can Seamer with: 1 sealing head Output speed range: 30 to 80 cans per minute Can diameter range: 202 to 404 Can height range: 108 to 708 3 horse power motor

41P WF (Aerosol) photo
Angelus 41P WF Can Seamer
Inventory #: C9510

Used Angelus 41P WF Can Seamer with: Application: Aerosol can bottoms Up to 325 cans per minute Can height: 7.5 inches

120 L photo
Angelus 120 L Steam Flow Can Seamer
Inventory #: C5430

Used Angelus 120 L Steam Flow Can Seamer with: Last ran steam flow cans 211 diameter steam change parts Upgraded grease injection system Stub infeed table Steam/gassing controls 120L electrical...

RPE-554-I LH, 120L photo
Elmar RPE554ILH Filler and Angelus 120L Can Seamer
Inventory #: B3633R

Used Elmar RPE-554ILH Can Filler and C3 120L Can Seamer with: Elmar Can Filler: Previously ran 3 ounce steel cans Can dimensions: 2.5 inch diameter x 2 inches tall 54 filling...

60L photo
Angelus 60L Can Seamer and Elmar RPE-528CLH Filler
Inventory #: B3631

Used Angelus 60L Can Seamer and Elmar RPE-528CLH Filler with: Angelus 60L Can Seamer: Output: 175 - 500 cans per minute depending on can size Steel construction Minimum...

50P DF photo
Angelus Automatic 3 Head Rotary Can Seamer
Inventory #: B3204

Used Angelus Automatic 3 Head Rotary Can Seamer with: Set for atmospheric closure of 401 diameter three piece metal cans Timing disk infeed 3 horsepower drive motor Speed: 200 cans...

10P photo
Angelus Model 10P Can Seamer
Inventory #: E7716R

Used Angelus Seamer with: Six Can Guides Adjustable for various can sizes Last Ran 4 1/4" diameter lids 1140 RPM, 3 HP Baldor Motor

60L photo
Angelus 60L Seamer
Inventory #: E5199

Used Angelus 60L Seamer with: Can closing machine Set up with 211 x 400 Steam change parts Rotary marker Filler drive In-motion timer Basic electrical, wired to Start-Stop Switch, new motor...

Showing 1-11 of 11 Items

Indicates Featured Item.
R Indicates Rental Option.


Enter your email address to get started.
Sigma Admin Info: /equipment/manufacturers.asp?mfg=angelus&cat=&cat2=&cat3=
  • saryAppActiveUsersTable = (Contains an Array)
  • NavMegadropdown = (Contains (2760) Characters)
  • EquipmentPhotoBlock = (Contains (1631) Characters)
  • EquipmentPhotoBlockCacheDate = 4/30/2017 1:44:28 PM
  • SigmaNewestBlock = (Contains (2469) Characters)
  • SigmaNewestBlockCacheDate = 5/1/2017
  • KeywordList = (Contains (612) Characters)
  • strTimeOfVisit: 4/30/2017 1:39:31 PM
  • strRemoteAddr: 54.224.155.164
  • strLocalPage: /equipment/manufacturers/angelus/
  • strPageTitle: Used Angelus Equipment
  • strLocalQString: mfg=angelus&cat=&cat2=&cat3=
  • strUserAgent: CCBot/2.0 (http://commoncrawl.org/faq/)
  • intUserID: 2
  • strUserName: guest
  • bolDebugMode: 0
  • sMfg: angelus
  • sMFGID: 1605
  • sManufacturer: Angelus
  • strorderby= dateapproved
  • strorder= desc

  • mfg= angelus
  • cat=
  • cat2=
  • cat3=
Clear User Session & Cookies Clear Application My IP:54.224.155.164